1)Sanding 2)filling 3)Spraying 4)Repeat

The following things have progressed on the bus, a model which I'm becoming inseparable from.

-The massed out former has been coated in body filler and sanded back.

-Formers were made from Chemi-wood of the remaining windows and doors, which were coated in petroleum jelly and forced into filler.

-Which are removed leaving the shape which is sanded back. The front top deck window was particularly tricky, resulting in the front being removed with the disk sander. To be replaced with more filler.

-After 3 to 4 days of this proses a coat of primer had been added. So moulding should begin on Tuesday (damn bank holiday)